News

Faced with fierce market competition in the silicon‑steel industry recently, Baosteel Silicon Steel Division has targeted production bottlenecks of high‑end 0.23 mm grain‑oriented silicon steel for technical research. By optimizing roll‑change procedures and innovating operation modes, it has achieved dual improvements in production capacity and efficiency. The 0.23 mm grain‑oriented silicon steel features sophisticated craftsmanship and high production difficulty. Time‑consuming roll change and unstable rolling have long‑standing pain points. Based on on‑site production conditions, the RCM work area held special discussions to optimize operation workflows and establish standardized, high‑efficiency working specifications. To address operators’ concerns over speed increase, the team carried out training including simulation practice and experience sharing to overcome technical weaknesses. The rolling line saw over 20 % rise in rolling speed, unlocking full production potential with stable product quality. In February this year, the daily output of 0.23 mm grain‑oriented silicon steel hit a new phased high. Roll‑change time kept decreasing, saving 2 minutes per roll change, which greatly boosted production benefits and market competitiveness. A number of young backbones emerged during the technical campaign. New recruit Zhang Wenqiang dedicated himself to roll‑change operations and repeatedly set new job records. His fastest operation reached 60 % of the average duration, breaking post records five times in total. He drove the whole team to pursue higher efficiency and fostered a positive atmosphere for mutual improvement. Going forward, the Silicon Steel Division will keep optimizing production processes and prioritizing technological innovation to advance the high‑quality development of high‑end grain‑oriented silicon steel.

Recently, a delegation from a well‑known Brazilian transformer manufacturer visited Henan Angang South Electromagnetic New Materials for factory audit. Both sides held in‑depth discussions on customized R&D of high‑end oriented electrical steel, product certification and long‑term supply, helping Angang silicon steel expand into the American market. Previously, the Brazilian client’s project was stalled due to restrictive indexes including silicon steel thickness, iron loss and magnetic induction. Jointly with the technical team of Sendian Electric Power Equipment, Angang South Electromagnetic carried out targeted research and developed customized high‑end oriented electrical steel. Actual test results show its performance is 10% higher than customer expectations with indexes exceeding international standards, winning high recognition from overseas clients. The Brazilian delegation conducted on‑site inspection of the production base. Technical exchanges on production lines, quality control and customized R&D were carried out and cooperation consensus was reached. The NOM certification required for North‑American market access was officially initiated, laying a foundation for bulk exports. In Q2 2026, the company promoted end‑user direct supply and expanded domestic and international channels. Monthly output stably reached 6,000 tons from April to May. Fourteen new end‑users were developed, with monthly sales hitting 5,700 tons and 6,200 tons respectively. Both production and sales kept growing. Going forward, the enterprise will focus on quality improvement of oriented electrical steel, further develop domestic and overseas markets, deepen industrial‑chain cooperation, expand global market share and achieve high‑quality and sustainable development.

Recently, experts and officials from MIIT, Peking University and Hunan Provincial Department of Science and Technology conducted an on‑site investigation at Hunan Jinci New Materials Technology Co., Ltd to guide the enterprise’s scientific‑technological innovation and industrial upgrading. Leaders from municipal and district authorities accompanied the visit. The research group visited the intelligent production workshop, precision‑processing center and product exhibition area. They inspected automated equipment and the whole manufacturing process of silicon steel deep‑processing and high‑end motor iron cores, and held in‑depth exchanges covering R&D, capacity building, quality control, market expansion and industry‑university‑research cooperation. The group highly recognized the enterprise’s achievements, standardized management and technical accumulation, as well as its competitive advantages in high‑end silicon steel deep‑processing, magnetic materials and new‑energy motor iron core supporting business. Its commitment to real‑economy manufacturing and intelligent manufacturing upgrading won wide praise. As a key backbone and specialized‑refined‑special‑new cultivating enterprise in Loudi Economic & Technological Development Zone, Hunan Jinci New Materials focuses on R&D and production of magnetic materials, silicon steel processing and high‑end motor iron cores. Its intelligent manufacturing system supplies products for new‑energy vehicles, industrial motors, wind‑power equipment and other high‑end sectors. The investigation represents full recognition of the company’s comprehensive strength. Going forward, the company will increase R&D investment, optimize manufacturing techniques, strengthen new‑material business and boost the high‑quality development of local advanced manufacturing industry.

On June 23, Zhou Keming, Chairman of Daming International, and Liang Zongren, President, led the core management team to visit and hold exchanges at Tianjin Zhufeng Silicon-Steel Co., Ltd. The visiting delegation was warmly received by Li Peifu, General Manager, Wang Wei, Deputy General Manager, and Man Rui, Deputy Chief Engineer of Tianjin Zhufeng Silicon-Steel. During the forum, both sides conducted in-depth discussions on project implementation, industrial coordination, supply chain efficiency improvement and silicon steel product application expansion. Multiple consensus were reached, further consolidating the foundation for upstream and downstream industrial cooperation. As a leading one-stop high-end manufacturing service enterprise in China, Daming International was listed in Hong Kong in 2010. With processing bases nationwide and business covering domestic and overseas markets, the company has been selected into the China Top 500 Enterprises for three consecutive years, boasting outstanding operational strength and comprehensive service capabilities. A high-end intelligent silicon steel manufacturer under TBEA, Tianjin Zhufeng Silicon-Steel features an annual production capacity of 100,000 tons of silicon steel. It realizes highly efficient production through digital twin technology, intelligent cutting systems and integrated MES platforms. Endowed with a number of independent patents, the enterprise has been recognized as a cultivated “Cheetah Enterprise” and “Zero-Carbon Factory” in Tianjin, with remarkable strengths in high-end silicon steel R&D and manufacturing. The visit has built an efficient communication bridge for bilateral cooperation. Going forward, the two parties will integrate industrial chain resources, deepen strategic cooperation in the silicon steel sector, and jointly drive the high-quality upgrading of the electrical steel industry.

Recently, Hubei Provincial Department of Economy and Information Technology announced the list of 2026 Advanced‑Level Smart Factories. The Silicon Steel Intelligent Inspection Plant (Silicon Steel Work Area of Quality Inspection Center) of Wuhan Iron and Steel Co., Ltd. was successfully selected. This honor marks a key practice of China Baowu’s “AI + Steel” strategy and Baosteel Co., Ltd.’s Smart Manufacturing 2.0 initiative. Centered on full‑process unmanned intelligent inspection, the plant integrates machine vision, deep learning, digital twin, 5G and gigabit optical ring network technologies, forming a three‑in‑one development model of “equipment upgrading + technological innovation + management restructuring”. Built on a four‑layer collaborative technical architecture supported by 5G and gigabit optical ring network, the plant is equipped with more than 20 sets of high‑end facilities including automatic laser cutting and AC magnetic testing devices. Numerical‑control and networking rates of key equipment reach 100%, enabling non‑stop inspection switching for hundreds of silicon steel grades. Several self‑developed devices such as automatic Vickers hardness tester and electrical steel adhesion tester are world‑first, filling gaps in full‑process unmanned inspection and delivering measurement accuracy beyond national standards via machine vision and deep learning algorithms. Remarkable benefits have been achieved through intelligent transformation. The plant processes over 3,600 silicon steel samples daily with a 38% efficiency improvement. It supports inspection work for 3‑million‑ton silicon steel capacity without additional manpower. Labor intensity for key posts is greatly reduced, equipment failure rate and downtime are substantially cut, and comprehensive equipment availability hits 99.7%. QR‑code‑based full‑process traceability ensures product quality. This intelligent inspection solution has been replicated to the cold rolling work area. It accumulates practical experience for internal intelligent upgrading of WISCO and provides valuable reference for the transformation of inspection and testing laboratories across China’s steel industry.

The 2026 CWIEME Berlin opened from May 19 to 21. Led by Liang Liang, Deputy General Manager, Lianyuan Iron & Steel Electromagnetic Materials Co., Ltd. showcased its core silicon steel products, demonstrating China’s silicon steel manufacturing capabilities to global partners. As a flagship exhibition for the global electromagnetic industry chain, CWIEME Berlin gathered nearly 500 leading enterprises from 35 countries, focusing on cutting-edge technologies for motors, transformers and new energy electric drives. Lianyuan Iron & Steel Electromagnetic Materials specializes in silicon steel R&D and production, offering non-oriented and oriented silicon steel widely used in new energy vehicle drive motors, energy-saving transformers and industrial motors. Its products are well recognized worldwide for stable performance featuring low core loss and high magnetic induction. During the exhibition, the booth attracted numerous overseas clients. The team held in-depth discussions on product specifications and high-end silicon steel solutions, exchanged views on technological upgrading and supply chain cooperation, and secured several preliminary cooperation intentions. Driven by the global green and low-carbon transition, demand for high-performance silicon steel keeps rising. This participation marks a key move for the company to expand overseas markets and strengthen international connections. Going forward, Lianyuan Iron & Steel Electromagnetic Materials will continue to focus on high-end markets including new energy vehicles and high-efficiency transformers. Through continuous technological innovation and product optimization, it will serve global customers with premium products and customized solutions, contributing to the green transformation of the electrical manufacturing industry.

Recently, WISCO Limited under Baosteel achieved a major production breakthrough on the No.4 Steel No.2 Hot Rolling Line. The hot charging rate of triple-size non-oriented silicon steel has steadily exceeded 90% for three consecutive months, marking the official transition from trial production to stable mass supply. As a high-end oversized non-oriented silicon steel product, triple-size silicon steel features larger length and width with higher requirements for rolling temperature and shape precision. It effectively improves downstream cutting efficiency and core performance, meeting the manufacturing demands of high-end motors and new energy equipment. To solve production bottlenecks including quality fluctuation and low hot charging rate, a cross-department technical team optimized key rolling processes and greatly improved production stability. Supported by digital intelligent manufacturing systems, the whole-process production management has been enhanced. Integrated steelmaking and rolling models realize real-time data tracking and rapid abnormal disposal, overcoming difficulties in heat loss control, quality uniformity and logistics scheduling. In the next stage, WISCO Limited will further implement lean production, upgrade high-end silicon steel rolling technologies, and empower the high-quality development of new energy and high-end equipment industrial chains with superior electrical steel products.

Recently, large batches of steel coils have arrived at Shandong Lufang New Materials Co., Ltd. After unloading, inspection and warehousing, sufficient raw material stock supports accelerated full-scale mass production of guardrail profiles and electrical steel. Adequate raw materials serve as a vital pillar for stable production and on-time delivery. Specializing in the R&D and manufacturing of guardrail products and new electrical steel materials, the company adheres to stringent quality standards and arranges production systematically focusing on efficient order fulfillment. All production lines are now operating at full capacity with streamlined procedures. Driven by rising orders for electrical steel processing and protective profiles, the production schedule is tight. All departments work in close coordination: production teams maximize output; technical teams optimize processes and resolve technical obstacles; quality inspection conducts full-process control; logistics provides solid support to achieve refined operation across the whole production chain. Going forward, all staff will stick to the three bottom lines of safety, quality and delivery to boost output and fulfill orders with guaranteed quality and quantity. In the second half of the year, the company will keep improving production processes and product performance, supplying stable and high-quality new materials to infrastructure, power sectors and partners, and advancing high-quality development through steadfast efforts.

Jiangsu Zhongsheng Electromagnetic Technology is an affiliate of Yima Holdings. With more than ten‑year expertise in new silicon‑steel materials, it ranks among the top players in East China in terms of silicon‑steel production capacity and slitting & distribution scale.   To fill the domestic capacity gap for high‑end silicon steel, the enterprise has invested in an electromagnetic‑materials project with an annual output of 350,000 tons. Boasting a total investment of 1.5 billion Yuan and covering over 200 mu of land, the project is listed as a Major Project of Jiangsu Province and is expected to generate 5 billion Yuan in annual revenue upon full operation. Recently, the DCL unit for HiB grain‑oriented silicon steel of the project has successfully completed ignition and oven‑baking. As the core equipment for high‑end silicon‑steel production, the production line is equipped with self‑developed circular high‑temperature bell‑type annealing furnaces, breaking overseas technological monopolies. The enterprise becomes the first private domestic firm to realize the industrial‑scale application of this complete set of equipment.   Installation of the project’s core equipment is now in its final phase. Leveraging the group’s full‑industrial‑chain strengths, the company is transforming itself into an intelligent manufacturer of high‑end new electromagnetic materials. Subsequent work will focus on production‑line commissioning and market expansion. It will supply high‑magnetic‑induction and low‑core‑loss silicon steel for new‑energy and power‑equipment industries, contributing to the upgrading of regional advanced‑materials industries.

As hot summer arrives, Jiangsu Shuaijin Motor launched a summer cooling welfare distribution activity to strengthen heatstroke prevention protection and safeguard the health of frontline employees. The company provided cooling drinks and summer supplies to all on-the-job staff. All employees from production lines, administrative offices and logistics departments stick to their posts despite high temperatures, ensuring the orderly progress of all production work. The company delivered cooling supplies to every employee to recognize their hard work, enabling staff to truly feel the warmth of the corporate big family. The collection scene was orderly. The thoughtful summer supplies eased employees’ fatigue in hot weather and further enhanced team cohesion and staff sense of belonging. In the future, adhering to the people-oriented philosophy, Shuaijin Motor will keep implementing employee care initiatives. The company and all staff will unite closely to jointly drive the high-quality development of the enterprise.

On June 26, the first hoisting operation of the 40-meter long-span overhead travelling crane in the finished product warehouse of the Shanxi Jingang ESP silicon steel project contracted by MCC Tianguang was completed. The hoisting process was safe, stable and accurately positioned, marking the full launch of equipment installation for the project. Located in Jincheng, Shanxi Province, the project is a key local initiative for hydrogen metallurgy and high-end new materials. It adopts the advanced ESP endless thin slab casting and rolling technology, with construction covering the ESP silicon steel production line and supporting facilities. Upon completion, the project will fill the local gap in high-end silicon steel products, build a green intelligent production line featuring short technological processes and low carbon emissions, and drive the upgrading of the regional new materials industry. The 40-meter overhead travelling crane hoisted this time falls under a high-risk special construction sub-project, characterized by high construction difficulty and stringent technical standards. The project team conducted preliminary plan reviews and comprehensive safety hazard inspections, implemented rigorous construction management and control, and successfully overcame the challenges of large-span equipment installation.   Going forward, the project team will strictly guarantee construction safety and quality, steadily advance subsequent equipment delivery, installation and commissioning, strive for the early completion and commissioning of the project, and fuel the green transformation of the regional iron and steel industry.

In recent days, Sha Steel rolled out its first coil of 0.10 mm ultra-thin high-grade non-oriented silicon steel. The full coil stretches 20,000 meters and is thinner than standard A4 printing paper, placing the company among China’s top manufacturers of ultra-thin high-grade non-oriented silicon steel. The production of 0.10 mm ultra-thin silicon steel is extremely challenging. The material features high brittleness, making strip breakage, wrinkling and other defects highly likely during rolling. Sha Steel’s R&D team overcame multiple core technical hurdles, achieving independent development and successful one-time rolling, ending long-term reliance on imports for this specification. The product has an alloy content of 5.0%, with iron loss reduced to below 9.5 W/kg, a decrease of as much as 50%. Under high-frequency operating conditions, it effectively cuts motor heat generation and lowers equipment weight. It meets the strict requirements for lightweight motors, high torque and low power loss in emerging sectors including drones and humanoid robots.   To date, Sha Steel has developed more than 150 silicon steel grades covering all performance tiers, with a dedicated product line for new energy vehicles. Going forward, the enterprise will pursue the development of an even thinner 0.08 mm specification. Targeting high-speed motors rotating above 30,000 revolutions per minute, it will keep upgrading high-performance silicon steel to support domestic industrialization of low-altitude economy and humanoid robot supply chains.

Electrical steel is a core material for efficient conversion between electrical energy and magnetic energy. Widely used in new‑energy vehicles, transformers and high‑end home appliances, it is known as the “pearl on the crown” of the steel industry.   To meet the stringent requirements of humanoid robot motors for lightweight design, high torque density and low core loss, Shougang completed more than 600 formula tests through one‑year‑long R&D efforts and successfully developed 0.2 mm ultra‑thin electrical steel specially for humanoid robots. Compared with conventional grades, its core loss is reduced by 20%‑30%, satisfying joint motors’ demands for flexible operation, low heat generation and low power consumption. Booming growth of humanoid robots, low‑altitude‑economy UAVs and intelligent terminals unlock huge market potential for ultra‑thin high‑performance electrical steel. It is estimated that 10 000 units of humanoid robots will consume roughly hundreds of tons of electrical steel, generating a market worth hundreds of billions of yuan in the future.   During the 14th Five‑Year Plan period, China has fully mastered manufacturing technologies for high‑grade electrical steel. Its electrical steel for new‑energy vehicles and UHV power grids have reached internationally‑advanced standards. Looking ahead to the 15th Five‑Year Plan, market demand for electrical steel will keep growing driven by new‑energy vehicles, power‑grid construction, robots and the low‑altitude economy.

Hunan’s 2026 Provincial Key Industrial Projects have been released. Hunan Panda New Materials, a subsidiary of Panhua Group, has its production lines with an annual output of 50,000 tons of silicon steel strip and 200,000 tons of carbon steel strip selected into Yueyang’s major project list.   As a national high-tech and specialized, sophisticated, distinctive and innovative enterprise, Hunan Panda specializes in various high-end thin sheet materials, whose products are widely applied in new energy, electric motor and transformer industries. The project will improve the central China silicon steel industrial chain and fill the supply gap of core materials for new energy equipment upon completion.   Founded in 2001, Panhua Group has built four domestic thin sheet manufacturing bases along the Yangtze River. It posted an operating revenue of nearly 60 billion yuan in 2024 and ranks among China’s leading private manufacturers of thin steel sheets, supplying silicon steel products worldwide. The supporting three-in-one self-bonded electrical steel technology can triple stamping capacity and greatly cut processing costs. Steel mills, motor manufacturers and stamping factories are welcome to discuss cooperation with us.

On July 21, the 1400mm 20-high reversible cold rolling mill of Zhejiang Jinlei Soft Magnetic Materials completed a successful trial run and rolled out its first qualified coil of high magnetic induction oriented silicon steel, marking the official launch of trial production for the production line.   The No.1 rolling mill was tailor-made by MCC-SFRE, with an annual production capacity of 80,000 tons. It is specially developed for rolling high-grade oriented silicon steel applied in new energy equipment and transformers. The supporting No.2 unit is currently under installation.     Founded in 1999, Zhejiang Jinlei invested a total of 1.8 billion RMB in its silicon steel project with an overall annual capacity of 250,000 tons. Adopting eco-friendly pickling-free production lines, the company mainly produces Hi-B oriented silicon steel and high-grade non-oriented silicon steel. Its subsidiary focused on iron core processing boasts an annual processing capacity of 20,000 tons, providing one-stop deep processing services including transformer iron cores and custom-sized silicon steel strips.   The industry has also rolled out three-in-one self-bonded composite electrical steel. Its three-layer composite specifications cover 0.30mm, 0.45mm and 0.60mm. This material triples stamping production capacity and drastically cuts processing costs. Patent cooperation is now open to steel mills, motor manufacturers and stamping factories.   Driven by growing demand for high-end silicon steel from the new energy and power grid sectors, intelligent rolling mills, eco-friendly manufacturing processes and innovative composite electrical steel will jointly boost quality improvement and cost reduction across the entire silicon steel industrial chain.

Recently, the 2026 Hangzhou International AI Terminal Industry Expo was successfully held at Hangzhou Grand Convention & Exhibition Center. Jiangsu Shuaijin Motor Technology Co., Ltd. showcased a variety of precision motor stator and rotor cores at the exhibition, exchanged insights with industry peers and demonstrated its technical strengths in precision manufacturing of motor cores.   On site, samples including stator cores, coated cores and single-tooth stator cores were displayed to meet diverse specifications of motors, attracting many visitors for inquiries. Equipped with over 50 precision stamping production lines, Shuaijin Motor offers rapid development and large-scale high-speed production. The company customizes stator and rotor cores for new energy motors and automated equipment, delivering one-stop services covering mold development, stamping and further deep processing. This exhibition serves as an excellent communication platform. Going forward, Shuaijin Motor will keep focusing on precision motor core manufacturing and optimizing production processes. It will supply reliable core solutions for clients in new energy and intelligent equipment sectors, and looks forward to cooperating with global customers for win-win results.

The industry exhibition was successfully held in Shanghai from July 1 to 3. Jiangsu Shuaijin Motor Technology Co., Ltd. presented a variety of precision motor stator and rotor cores at Booth E6B025, engaging in face-to-face communication with domestic and overseas buyers. At the exhibition, Shuaijin Motor displayed samples of stator cores, single-tooth cores and coated cores to demonstrate its technical advantages. Equipped with multiple precision stamping production lines, the company provides one-stop customized services including mold development, stamping processing and deep core machining, suitable for new energy motors and automation equipment. Many purchasers visited our booth for consultation. Our team introduced product specifications, production capacity and customized solutions, and discussed industry trends, creating valuable business connections. This exhibition enhanced Shuaijin Motor’s brand influence. In the future, we will keep focusing on precision manufacturing of motor stator and rotor cores, continuously improve production processes, and serve customers with reliable high-quality products. We look forward to win-win cooperation with more partners.

To enrich employees' cultural life, relieve work pressure and strengthen team cohesion and sense of belonging, Jiangsu Shuaijin Motor recently organized all staff on a red-themed team building tour to Changsha and Shaoshan, Hunan Province. The tour featured a rich itinerary. The team visited Hunan Museum to admire precious cultural relics from the Mawangdui Han Tomb and experience the long-standing Hunan culture. They traveled to the Former Residences of Comrade Mao Zedong in Shaoshan and Comrade Liu Shaoqi, tracing red historical footprints, learning from the great men and immersing themselves in revolutionary culture. In addition, the group toured Orange Island Head overlooking the Xiang River, feeling the heroic spirit of "pointing out rivers and mountains". They also climbed Yueyang Tower to appreciate the profound cultural heritage of this time-honored landmark. During spare time, employees visited characteristic commercial blocks and tasted local delicacies, communicating with each other in a relaxed and pleasant atmosphere. The journey was full of beautiful moments and companionship. This trip not only helped everyone unwind and broaden their horizons, but also strengthened the bond between colleagues. In the future, all staff of Shuaijin Motor will transform what they gained from this activity into work motivation. With greater enthusiasm and teamwork spirit, we will keep focusing on precision manufacturing of motor stator and rotor cores, and jointly create a new chapter of high-quality development for the enterprise.

As the end of 2025 approaches, against the industry backdrop of the upcoming implementation of China’s new energy efficiency standards and the "quality manufacturing" inflection point in the motor industry, Jiangsu Shuaijin Electric Motor Technology Co., Ltd. (hereinafter referred to as "Shuaijin Electric Motor"), located in Nanzhan Sub-district of Jiangyin City, has become a reliable partner in fields such as transformers, home appliances, and new energy vehicles with nearly 20 years of technological accumulation and precise market layout, demonstrating the innovative vitality of the Yangtze River Delta motor industry cluster.   Founded in 2006, Shuaijin Electric Motor has grown from a traditional manufacturing enterprise to a high-tech small and medium-sized enterprise and innovative small and medium-sized enterprise with 15 patents and 4 registered trademarks after three rounds of business upgrades and brand iterations. The company focuses on EI-type, UI-type silicon steel sheets of 0.35mm and 0.5mm specifications as well as various shear sheet series products, covering both international standard models and customizable non-standard products to fully meet the core component needs of single-phase, three-phase motors and transformers. As a key part of the motor’s "heart", its products are widely used in traditional fields such as home appliances, power tools, welding, and automobile manufacturing, and have successfully entered high-end tracks including new energy vehicles and aerospace, laying a solid foundation for improving the energy efficiency of end products with the core advantages of low loss and high magnetic induction.   Amid the industry’s transformation towards high efficiency, intelligence, and greenization, Shuaijin Electric Motor accurately grasps policy orientation and technological trends. In response to the new energy efficiency labeling management regulations for permanent magnet synchronous motors to be implemented on January 1, 2026, the company has advanced the R&D and production of low-loss silicon steel sheets in advance. Through optimized electromagnetic design, its products can help terminal equipment achieve efficient operation under dynamic working conditions, perfectly complying with the new regulation’s shift from "steady-state testing" to "dynamic testing". Relying on core patented technologies such as stator lamination welding frames, Shuaijin Electric Motor has formed unique advantages in the motor iron core manufacturing field, and its stator and rotor components have successfully debuted at robotics-related industry exhibitions, becoming an outstanding representative among local supporting enterprises in Jiangyin.   Adhering to the development concept of "technology as the foundation and market as the orientation", Shuaijin Electric Motor has built a full-chain service system from R&D, production to sales. With a registered capital of 10 million yuan, the company holds complete qualifications for transformer, rectifier, and motor manufacturing as well as import and export. Its products not only cover the domestic market but also enter the global market through import and export agency services. From winning the motor procurement project of Datang Yangcheng Power Generation Co., Ltd. to providing customized silicon steel sheet solutions for leading home appliance enterprises, Shuaijin Electric Motor has won recognition from customers in various industries with stable product quality and flexible service models.   Currently, China’s motor market scale continues to expand — the market scale of washing machine motors alone reached 42 billion yuan in 2025 and is expected to increase to 68 billion yuan by 2030. Facing the broad market space, the person in charge of Shuaijin Electric Motor stated that the company will continue to focus on core technology iteration and deepen collaborative innovation with upstream and downstream enterprises. On one hand, it will increase R&D related to the localization replacement of high-end silicon steel sheets; on the other hand, it will expand supporting services in emerging fields such as industrial robots and drones, contributing more competitive products to promote industry energy efficiency upgrading and achieve high-quality enterprise development under the guidance of the "dual carbon" goals.

Amid the full acceleration of the "14th Five-Year Plan" new power system construction driven by national policies, Jiangyin Shuaijin Electric Co., Ltd. (hereinafter referred to as "Shuaijin Electric") closely follows the trend of energy efficiency upgrading and officially launches a series of new motors and core component products complying with IE4 energy efficiency standards. Driven by both material innovation and process optimization, the company injects green momentum into home appliances, industrial automation, new energy and other fields, demonstrating the innovative resilience of small and medium-sized manufacturing enterprises.   As a powerful enterprise deeply engaged in the motor industry for nearly 20 years, Shuaijin Electric has always focused on the R&D and manufacturing of core components. Its 0.35mm and 0.5mm EI-type, UI-type silicon steel sheets and customized shearing products have won wide market recognition with high-precision processing technology, and have been successfully applied in transformers, electric tools, automobile manufacturing and other diverse scenarios. This new product upgrade closely meets the mandatory requirements of GB30253-2024 "Minimum Allowable Values of Energy Efficiency and Energy Efficiency Grades for Permanent Magnet Synchronous Motors", achieving a leap in efficiency through three major technological breakthroughs: first, optimizing the stamping process of silicon steel sheets to control the burrs of core components at the micron level, significantly reducing iron loss and eddy current loss; second, adopting low-resistance winding materials and innovative wiring design to reduce copper loss by more than 15%; third, integrating intelligent monitoring modules to realize real-time tracking of equipment operation status and fault early warning, adapting to the needs of modern industrial flexible production.   "With the in-depth advancement of new power system construction, high efficiency, energy saving and intelligent interconnection have become the core competitiveness of the motor industry," said the person in charge of Shuaijin Electric. Relying on the "customized R&D + refined production" model, the company can not only quickly respond to customers' personalized needs for single-phase, three-phase motors and non-standard products, but also reduce product energy consumption by 20%-30% compared with traditional models and extend service life by more than 30% through industrial chain collaborative innovation, perfectly matching the industrial upgrading needs under the "dual carbon" goals. At present, this series of new products have passed a number of authoritative testing and certifications, and are supplied in batches to well-known domestic and foreign home appliance enterprises and industrial equipment manufacturers, winning market favor with high cost performance and stable performance.   Looking to the future, Shuaijin Electric will continue to deepen the integration of industry, university and research, focus on key areas such as permanent magnet synchronous technology and variable frequency speed regulation systems, further expand high-end application scenarios such as aviation supporting facilities and robot joint modules, and provide more competitive green and energy-saving solutions to help customers reduce costs and increase efficiency. It will seize opportunities in the wave of high-quality development of the global motor industry and write an innovative answer sheet for "Jiangyin Intelligent Manufacturing".